Fixes
00195599 — Audit log entry not correct for password resets through "Forgot password"
Fixed: when a user changes their password through the “Forgot password” link, this action shows up as “User was modified” rather than “Password changed” in the audit log.
00195121, 00196109 — Unable to edit start date in calculations
Fixed: when locking a calendar up to 2019, month 12 calculations which include a date partition with 01/01/2020 as the start date can’t be edited. If the start date is 01/02/2020, the start date can be edited.
00196109 — Problems with changing time partition in Calculation
Fixed: when you open a calculation and view the date display column, you have the option to change which calendar you are partitioning by and the Calculation and Accumulation levels. But, if you remove the date display column and drag over a new one from a different source, the partition by section defaults to a different calendar and the options to change the Calculation and Accumulation levels are greyed out.
00195976 — Delete Row wizard for a table in Composer does not show the source table when first opened
Fixed: when a table is selected for the first time in Composer and then the Delete Rows option is selected, there is no source table to select the fields from. After closing the wizard and reopening, the data source appears. The data source should always be visible.
00195307, 00195407, 00195459 — Export to Excel date formatting inconsistency
Fixed: when exporting a date column to Microsoft Excel, the date format changes to YYYY-MM-DD when it should remain as the same date format in the model (for example, MM-DD-YYYY).
00194623 — Table web edits > Enable Group Permissions > select columns does not scroll down if there are too many columns
Fixed: when selecting a table in Composer, and then going to Web data edit > Edit column permissions > Enable Group and then go to the Select Columns tab, if there are a lot of columns, you cannot scroll down to view all of them.
00189992 — Pick list data isn't filtered based on effective date
Fixed: in row viewer, pick list controls are not filtered based on the effective date when the pick-listed table is also effective-dated.
1. In Composer, add a structural table. Make it effective-dated.
2. In Composer, add a custom table.
a. When creating columns, make one of the columns a pick list to the structural table added in step 1.
3. Add data to the structural table. Make sure at least one row has an effective end date before the default end date. For example, set the effective end date to 02/28/2014.
4. Add data to the custom table. Set the effective date to after the row you added in step 3 (the example being 02/28/2014).
5. Click the Add button to add a row.
6. Click the drop-down menu for the pick-listed column (the one you added in step 2a).
Result: you can select data from the structural table even though, based on the effective end date selected for the custom table, it isn't valid. When you try to submit the row, an error occurs, but invalid data shouldn't appear in the pick list.
00195433, 00195529 — Delete Rows doesn't show data source
Fixed: when using the Delete Rows function, the data source does not display until you click Preview.
1. Go to composer.
2. Click on a table, and go to the data source.
3. Click Delete Rows, and notice that no data appears.
4. Click Preview.
5. Go back, and the data source appears. The data source should appear without clicking Preview.
00192171, 00194931 — An internal error occurs after migration
Fixed: when performing a migration between environments, the migration completes successfully, but an error message appears.
TS003154328 — Migration fails with "An item with the same key has already been added." error
Fixed: migration fails due to a duplicate port issue. The error is, "An item with the same key has already been added." This fix prevents duplicate ports from being created in a component.
00194658 — Can't scroll down through Payee Web administrator messages
Fixed: when there are too many administrator messages to fit on the screen, you can’t scroll down to see all of the messages. The pagination is also inaccessible.
00190387 — Toggling pick list results in all columns being filled with 0 on Payee Web
Fixed: when changing the value in a pick list in the final row of a specific report on Payee Web, the entire column gets populated with zeros. This issue does not occur in Payee Web Classic.
00195803 — Scheduled PPO calculation failed
Fixed: PPO calculation failed due to Cloud outages. Made improvements to better handle retries in these cases in the future.
00195839 — Full PPO calculation stuck at syncing back results
Fixed: PPO calculation gets stuck at syncing back results. Now, instead of getting stuck, it should cause a retry. If the retry fails, the calculation should show up as failed instead of getting stuck.
00195409 — Cannot add or remove favorites in Composer
Fixed: when trying to add a new table to the Favorites list, or remove an existing table from the Favorites list, an error occurs.
00195385, 00196116, 00196056, 00196620, 00195433, 00196617 — The first data source in a calculation disappears in the restrictions tab when adding or editing a calculation
Fixed: when adding or editing a calculation, the first data source occasionally disappears from the list when going to the restrictions tab, making it difficult to edit calculations.
00194644 — Issue with axis sorting in charts in Presenter reports
Fixed: in a Presenter report, when trying to sort the columns in both the X-axis and the Y-axis to either ascending or descending, the columns are not properly sorted.
00188301 — The selected chart type for a source is not visible in the pick list when editing the source
Fixed: when editing a saved Presenter report with a multi series combo 2D chart type, the source data display type doesn’t populate in the pick list.
00194129 — $ sign not being accepted by Presenter
Fixed: when trying to enter a monetary value with the $ symbol in a web form in a Presenter report, an error occurs.
00195145, 00195138 — Export to Excel or CSV is rounding up the numeric values
Fixed: when exporting a table to Excel or CSV, values are rounded to two decimal places upon download. Previously, you could view additional decimal places by changing a cell’s format. Now, only two decimal places can be viewed. This issue also occurs when copying and pasting a value with more than two decimal places into a text file.
TS002299284 — External tool timeout does not work
Fixed: the timeout setting for external tools does not work.
1. Log in to the admin client.
2. In Scheduler, add a task to a process folder.
a. From the Type menu, select External Tools as the type of task.
3. On the External Tools tab, you can select these settings:
a. From the Maximum run time (seconds) field, set the maximum time to be less than the time you know the tool will run for.
b. Select the 'Stop on timeout' checkbox.
4. Run the Scheduler process.
The result is the external tools script does not time out and continues running until the script is complete.
00194968 — Inquires created by Ask Varicent do not send notifications to payee
Fixed: when Ask Varicent creates an inquiry on behalf of the payee, no notification is sent to the user. Inquiries made from Ask Varicent should work the same as if the user created the inquiry themselves and they should get a notification.
00193963 — Payee Web message doesn't translate to browser's default language
Fixed: some messages in Payee Web aren't translated into the browser’s default language.
00195099 — Unable to edit web form filters in a value source from a web form
Fixed: web form filters in a migrated web form don't appear and the 'Add filter' button doesn't work.
1. In Composer, select a web form that has existing filters.
2. Select any of the value cells and then click Edit.
3. Go to the Filter tab.
Result: no filters appear.
4. Try to click the Add filter button.
Result: Nothing happens.
00195079 — Can't start or stop workflows without the Edit permission
Fixed: users with View and Execute permissions, but not Edit permission, are unable to start and stop workflows. Workflow start and stop permissions are now correctly tied to Execute rather than Edit.
00195641 — Data Store primary source not showing on the Restriction tab
Fixed: when adding or editing a calculation, the first data source occasionally disappears from the list when going to the restrictions tab, making it difficult to edit calculations.
00195258 — Web tab name is truncated when using Nested web theme
Fixed: when the Nested layout is selected for Payee Web, only the first 36 characters of a web tab name are visible.
1. Create a web tab with a long name (more than 36 characters) under a web tab group.
2. Under Admin > More Options > Web Themes, set layout to Nested.
3. Log in to Payee Web.
Result: Only the first 36 characters of the web tab are seen.